|
Error Codes
If the error code will not clear, call
Orlando Laser etc.: 407.478.1490
02 Warming Up (>3
Minutes)
1. Remove computer cables,
then replace cables.
11 Paper Out
1. Paper tray empty or not
seated correctly.
12 Printer Open or No
Toner
1. Open and shut printer
lid.
2. Replace toner cartridge.
13 Paper Jam
1. Obstruction in paper
path -- remove jammed paper or foreign object.
2. Out of spec media or
improperly loaded media.
14 No EP Cartridge
1. No toner cartridge is
installed.
2. Bad toner cartridge.
16 Toner Low
1. Replace toner cartridge.
18 MIO Not Ready
1. Printer is not connected
to active LAN.
20 Error/Memory Overflow
1. Add memory: Call Orlando
Laser etc. for memory upgrade.
2. Simplify print job.
21 Error/Print Overrun
1. Simplify print job.
2. For Laserjet III, IIID,
IIIP, with 1 MB extra memory, enable page protect.
22 Error I/O Config
Error
1. I/O config for the
computer or printer is incorrect.
2. Wrong I/O cable.
3. Computer is off.
23 I/O Not Ready
1. I/O card is unable to
accept data or is not connected to the network.
24 Job Memory Full
1. Add memory: Call Orlando
Laser etc. for memory upgrade.
2. Simplify print job.
25 XXX Memory Full
1. Add memory: Call Orlando
Laser etc. for memory upgrade.
2. Simplify print job.
30 PS Error XX
1. PCL file being sent to
printer while in postscript mode.
2. Check postscript roms.
40 Error (Data Transfer
Error)
1. Reset by pressing the
continue key.
2. This error can be caused
by paper feed problems.
41.3 Error
1. Paper size selection
does not match installed paper.
2. One of the cassettes is
overful or improperly adjusted.
3. Paper is out of spec.
50 Error
1. Turn printer off for 20
minutes to clear error.
2. If error does not clear,
turn off printer and call technician.
51 Error
1. Call technician. |